Citation: | LI Jing-peng, MA Ru-min, WU Zai-xing, BAO Yong-jie, CHEN Yu-he. Effects of Chemical Pretreatment on the Growth of TiO2 Nanoparticles on the Bamboo Surface[J]. JOURNAL OF BAMBOO RESEARCH, 2021, 40(1): 16-21. |
[1] |
江泽慧. 竹材解剖学研究进展[J]. 世界林业研究,2020,33(3):1-6.
|
[2] |
余辉龙,杜春贵,刘宏治,等. 竹材防霉研究进展与发展前景[J]. 竹子学报,2016,35(2):46-51.
|
[3] |
李延军,许斌,张齐生,等. 我国竹材加工产业现状与对策分析[J]. 林业工程学报,2016,1(1):2-7.
|
[4] |
李景鹏. 竹材表面仿生功能构建及形成机理研究[D].杭州:浙江农林大学,2015.
|
[5] |
高丽坤. 生物质基多元复合半导体材料的制备及其多功能特性的研究[D].哈尔滨:东北林业大学,2020.
|
[6] |
孙丰波,余雁,江泽慧,等. 竹材的纳米TiO2改性及抗菌防霉性能研究[J]. 光谱学与光谱分析,2010,30(4):1056-1060.
|
[7] |
江泽慧,孙丰波,余雁,等. 竹材的纳米TiO2改性及防光变色性能[J]. 林业科学,2010,46(2):116-121.
|
[8] |
宋烨,吴义强,余雁. 二氧化钛对竹材颜色稳定性和防霉性能的影响[J]. 竹子研究汇刊,2009,28(1):30-34.
|
[9] |
陶鑫,陈琳,徐伟,等. 纳米二氧化钛改性杨木的力学性能研究[J]. 木材加工机械,2019,30(1):21-23
,29.
|
[10] |
李景鹏,吴再兴,任丹静,等. 无机纳米材料在木竹材防霉防腐中的研究进展[J]. 竹子学报,2019,38(2):16-23.
|
[11] |
D. Ren,J. Li,Y. Bao,et al. Low-temperature synthesis of flower-like ZnO microstructures supported on TiO2 thin films as efficient antifungal coatings for bamboo protection under dark conditions[J]. Colloids and Surfaces A:Physicochemical and Engineering Aspects,2018,555:381-388.
|
[12] |
J. Li,Y. Lu,Z. Wu,et al. Durable,self-cleaning and superhydrophobic bamboo timber surfaces based on TiO2 films combined with fluoroalkylsilane[J]. Ceramics International,2016,42:9621-9629.
|
[13] |
J. Li,H. Yu,Z. Wu,et al. Room temperature synthesis of crystalline anatase TiO2 on bamboo timber surface and their short-term antifungal capability under natural weather conditions[J]. Colloids and Surfaces A:Physicochemical and Engineering Aspects,2016,508:117-123.
|
[14] |
刘梦雪,程海涛,田根林,等. 竹材细胞壁主要化学成分研究进展[J]. 西南林业大学学报,2016,36(6):178-183.
|
[15] |
王小青,任海青,赵荣军,等. 毛竹材表面光化降解的FTIR和XPS分析[J]. 光谱学与光谱分析,2009,29(7):1864-1867.
|
[16] |
刘彬彬,张绍勇,周月英,等. 浸提处理对竹粉霉变性能的影响[J]. 浙江农林大学学报,2015,32(1):11-17.
|
[17] |
王洪艳,胡波,李琴,等. 氢氧化钠溶液处理对竹粉-PHBV复合材料物理力学性能的影响[J]. 竹子学报,2017,36(4):9-13.
|
[18] |
郭宇,李超,李英洁,等.木材细胞壁与木材力学性能及水分特性之间关系研究进展[J].林产工业,2019,46(8):14-18.
|
[19] |
张润华,赵昕刚,马尔妮.栓皮槠软木微观构造和化学成分的研究[J].林产工业,2019,46(1):48-52.
|