Research Progress in Waterborne Coating of Bamboo

LIN Xin-yu; ZHANG Qiu-hao; HUANG Quan-fei; ZHANG Wei; WEI Rong-jun; WENG Yu; HUANG Yan-hui; FEI Ben-hua

Sep. 2021

Article Contents

Article Navigation > JOURNAL OF BAMBOO RESEARCH > 2021 > 40(1): 6-10

LIN Xin-yu, ZHANG Qiu-hao, HUANG Quan-fei, ZHANG Wei, WEI Rong-jun, WENG Yu, HUANG Yan-hui, FEI Ben-hua. Research Progress in Waterborne Coating of Bamboo[J]. JOURNAL OF BAMBOO RESEARCH, 2021, 40(1): 6-10.

Citation:

LIN Xin-yu, ZHANG Qiu-hao, HUANG Quan-fei, ZHANG Wei, WEI Rong-jun, WENG Yu, HUANG Yan-hui, FEI Ben-hua. Research Progress in Waterborne Coating of Bamboo[J]. JOURNAL OF BAMBOO RESEARCH, 2021, 40(1): 6-10.

Citation:

PDF( 1227 KB)

Research Progress in Waterborne Coating of Bamboo

1. College of Materials Science and Technology, Beijing Forestry University, Beijing 100083, China;
2. International Centre for Bamboo and Rattan, Key Laboratory of National Forestry and Grassland Administration/Beijing for Bamboo & Rattan Science and Technology, Beijing 100102, China

Received Date: 2020-05-29
Available Online: 2021-09-10

Abstract

Abstract

Waterborne coatings are environmentally friendly coatings with water as the solvent. It is widely used under the increasingly stringent environment protection policy. Due to the dense structure and poor permeability of bamboo, the adhesion ability of waterborne coating on bamboo is weak and the coating effect is poor. In this paper, the classification and performance of waterborne coating were reviewed, the combination mechanism of waterborne coating and bamboo was expounded, the factors affecting the coating of bamboo were pointed out, the research progress of waterborne coating on bamboo at present was summarized, and its development direction were proposed so as to promote the development of waterborne coating of bamboo.
- Waterborne coatings,
- Bamboo,
- Bamboo coating,
- Binding mechanism

FullText(HTML)

References(24)

References

[1]	Dashtizadeh A,Abdouss M,Mahdavi H,et al.Acrylic coatings exhibiting improved hardness,solvent resistance and glossiness by using silica nano-composites[J].Applied Surface Science,2011,257(6):2118-2125.
[2]	Khanjani J,Hanifpour A,Pazokifard S,et al. Waterborne acrylic-styrene/PDMS coatings formulated by different particle sizes of PDMS emulsions for outdoor applications[J]. Progress in Organic Coatings,2020,141(6):1-7.
[3]	张融,张禄晟,费本华,等.硅烷改性丙烯酸酯乳液涂饰竹集成材的防水防霉性能[J].林产工业,2013,40(6):57-59.
[4]	Liu M, Mao X H, Zhu H, et al.Water and corrosion resistance of epoxy-acrylic-amine waterborne coatings:effects of resin molecular weight, polar group and hydrophobic segment[J].Corrosion Science, 2013, 75(75):106-113.
[5]	Luo Z Y,Shi Y J,Zhao D,et al. Synthesis of epoxidatied castor oil and its effect on the properties of waterborne polyurethane[J].Procedia Engineering,2011,18(18):31-36.
[6]	Cheng L S,Ren S B,Lu X N. Application of eco-friendly waterborne polyurethane composite coating incorporated with nano cellulose crystalline and silver nano particles on wood antibacterial board[J]. Polymers,2020,12(2):407-417.
[7]	Rashvand M, Ranjbar Z.Effect of nano-ZnO particles on the corrosion resistance of polyurethane-based waterborne coatings immersed in sodium chloride solution via EIS technique[J].Progress in Organic Coatings, 2013, 76(10):1413-1417.
[8]	Yong Q, Pang H, Liao B, et al.Preparation and characterization of low gloss aqueous coating via forming self-roughed surface based on waterborne polyurethane acrylate hybrid emulsion[J].Progress in Organic Coatings, 2018, 115(115):18-26.
[9]	Hwang H D,Kim H J.Enhanced thermal and surface properties of waterborne UV-curable polycarbonate-based polyurethane(meth)acrylate dispersion by incorporation of polydimethylsiloxane[J].Reactive & Functional Polymers, 2011,71(6):655-665.
[10]	Chen H,Zhang Y T,Yang X,et al.A comparative study of the microstructure and water permeability between fattened bamboo and bamboo culm[J].Journal of Wood Science,2019,65(1):64.
[11]	Rijckaert V, Stevens M, Vanacker J. Quantitative assessment of the penetration of water-borne and solvent-borne wood coatings in Scotspinesap wood[J].Holz als Roh-und Werk st off,2001,59(4):278-287.
[12]	Xu J X,Liu R,Wu H,et al.Coating performance of water-based polyurethane-acrylate coating on bamboo/bamboo scrimber substrates[J].Advances in Polymer Technology,2019(31):1-8.
[13]	Fei B H, Gao Z M, Wang J,et al.Biological, anatomical, and chemical characteristics of bamboo[M]//Yoon S K, Ryof, Adya P S.Secondary Xylem Biology.Netherlands:Elsevier, 2016:283-306.
[14]	费本华,刘嵘,刘贤淼,等.竹材纹孔结构及表征方法研究进展[J].林业工程学报,2019,4(2):13-18.
[15]	孙照斌,杨燕,顾炼百.龙竹的常压液体渗透性研究[J].林产工业,2005,32(1):17-19.
[16]	饶森,余丽萍.预处理对毛竹流体渗透性的影响[J].林业机械与木工设备,2013,41(8):26-29.
[17]	何盛,吴再兴,徐军,等.碱液处理对改善竹束液体渗透性能的研究[J].林业工程学报,2019,4(3):25-31.
[18]	黄志伟. 超声处理对竹材表面特性及胶合性能的影响[D].南京:南京林业大学,2017.
[19]	陶鑫,毛泽南,徐伟,等.仿古涂饰工艺对改性杨木漆膜表面粗糙度的影响[J].林产工业,2019,46(6):33-36.
[20]	Rijckaert V,Stevens M,Vanacker J.Quantitative assessment of the penetration of water-borne and solvent-borne wood coating in scots pine sapwood[J].Holz als Roh-und Werkstoff, 2001, 59(4):278-287.
[21]	Zheng Y,Zhou L,Yang Y,et al.Synthesis and application of a novel epoxy grafted thermosetting acrylic resin[J].Journal of Applied Polymer Science,2008,107(6):4053-4060.
[22]	Zhang C Y, Zhu Z W, Gong S L.Synthesis of stable high hydroxyl content self-emulsifying waterborne polyacrylate emulsion[J].Journal of Applied Polymer Science,2017,134(21):44844.
[23]	Zhao B,Jia R,Zhang Y,et al.Design and synthesis of antibacterial waterborne fluorinated polyurethane[J].Journal of Applied Polymer Science,2019,136(2):46923.
[24]	Zhu Z W.Preparation and Properties of high solid content and low viscosity waterborne polyurethane-acrylate emulsion with a reactive emulsifier[J]. Polymers,2018,10(2):154-171.