The Changes of Density and Porosity of Bamboo Material in the Process of Fiber Rolling
-
摘要: 以开纤进程中竹材内部的密实度和孔隙率为研究对象，采用计算机断层扫描技术研究了竹片在连续辊压载荷作用下横截面分层解纤现象，分析了辊压次数对竹材内部孔隙率和密实度的影响规律。试验结果表明：随着辊压次数的增加竹材连续定向开纤过程经历了形态破坏、竹片密实化、竹片开裂间隙化和竹片开纤分离化几个阶段，不同阶段的变化可以通过孔隙密实比的数值大小而区分。试验表明：开纤完全的竹材在CT值上有明显的指标特征，当竹材间隙率大于80%，密实率小于5%，间隙密实比大于等于25时，竹片呈现纤维束完全分离状态。Abstract: In order to explore the changes of density and porosity of bamboo in the process of fiber manufacturing, the delamination phenomenon of bamboo cross-section under continuous rolling load was studied by using computer tomography technology, and the influence of rolling times on the porosity and compactness of bamboo was analyzed. The results showed that with the increase of rolling times, the continuous directional fiber manufacturing process of bamboo experienced several stages: morphological destruction, bamboo chip densification, bamboo chip cracking gap and bamboo fiber separation. The changes of different stages can be distinguished by the value of pore density ratio. The bamboo with complete fiber manufacturing had obvious index characteristics in CT value. When the gap ratio of bamboo was more than 80%, the density ratio was less than 5%, and the gap density ratio was greater than or equal to 25, the bamboo slices showed the state of complete fiber bundle separation.
-
Key words:
- Computed tomography /
- CT value /
- Porosity /
- Densification /
- Roll fabricated fiber
-
[1] 李延军,许斌,张齐生,等.我国竹材加工产业现状与对策分析[J].林业工程学报,2016,1(1):2-7. [2] 嵇伟兵,姚文斌,马灵飞.龙竹和绿竹竹材壁厚度方向的梯度力学性能[J].浙江林学院学报,2007,24(2):125-129. [3] 于文吉.我国高性能竹基纤维复合材料的研发进展[J].木材工业,2011,25(1):6-8,29. [4] 姚瑶,姚文斌,俞伟鹏,等.竹筒锥模受压开纤工艺研究[J].林业工程学报,2019,4(4):41-46. [5] 林茂阳.竹片翻卷反拉脱层成纤机理研究[D].浙江农林大学,2019. [6] 张蔚,李文彬,姚文斌.天然长竹纤维的分离机理及其制备方法初探[J].北京林业大学学报,2007,29(4):63-66. [7] 张蔚,姚文斌,李文彬.竹纤维加工技术的研究进展[J].农业工程学报,2008,24(10):308-312. [8] 韩健,吴冬梅.热压应变及相关因素对竹材表面粗糙度的影响[J].中南林学院学报,2005,25(5):57-62. [9] 田黎敏,靳贝贝,郝际平.现代竹结构的研究与工程应用[J].工程力学,2019,36(5):1-18,27. [10] 赵方博,刘德庆,岳德鹏,等.基于CT技术检测树木成像完整度的参数优化研究[J].林业资源管理,2019,该期刊只有写着第五期(5):95-103. [11] 单海斌,刘杏娥,杨淑敏,等.计算机断层扫描技术(CT)在木材无损检测中的应用与发展[J].浙江农林大学学报,2013,30(1):123-128. [12] 曹正彬,葛浙东,张连滨,等.计算机断层扫描技术在木材科学中应用研究进展[J].世界林业研究,2017,30(5):45-50. [13] 于雷,戚大伟.计算机断层扫描技术检测木材缺陷的研究[J].森林工程,2006,22(5):13-15,44. [14] 单海斌,刘杏娥,杨淑敏,等.基于计算机层析成像(CT)技术的梁山慈竹密度检测研究[J].光谱学与光谱分析,2014,34(12):3380-3384. [15] 王卿平,刘杏娥,张桂兰,等.基于X射线CT技术快速检测不同含水率状态下的毛竹密度[J].光谱学与光谱分析,2016,36(6):1899-1903. -
点击查看大图
计量
- 文章访问数: 1735
- HTML全文浏览量: 108
- PDF下载量: 139
- 被引次数: 0
下载:
