冰醋酸/双氧水改性竹材物理力学性能及化学成分分析

程亮; 唐荣强; 章卫钢; 张瑞华; 许允炳

doi:10.12390/jbr2022121

冰醋酸/双氧水改性竹材物理力学性能及化学成分分析

doi: 10.12390/jbr2022121

1. 浙江农林大学浙江省木材科学与技术重点实验室, 浙江杭州 311300;
2. 浙江省林业科学研究院浙江省竹类研究重点实验室, 浙江杭州 310023;
3. 杭州市临安区人民政府青山湖街道办事处, 浙江杭州 311300

基金项目:

浙江省省属科研院所专项(2021F1065-9)

详细信息

作者简介:
程亮，硕士研究生，从事竹材改性产品研究。E-mail：cl335107919@126.com。

通讯作者:
章卫钢,高级实验师,硕士,从事竹材功能性改良研究。E-mail:20091018@zafu.edu.cn

计量
- 文章访问数: 142
- HTML全文浏览量: 18
- PDF下载量: 58
- 被引次数: 0
出版历程
- 收稿日期: 2022-10-20

Analysis of Mechanical Properties and Chemical Composition of Bamboo Flakes after Softening Treatment

1. Key Laboratory of Wood Science and Technology of Zhejiang Province, Zhejiang A&F University, Hangzhou 311300, Zhejiang, China;
2. Key Laboratory of Bamboo Research of Zhejiang Province, Zhejiang Academy of Forestry, Hangzhou 310023, Zhejiang, China;
3. Qingshanhu Sub-district Office of People's Government of Lin'an District, Hangzhou 311300, Zhejiang, China

摘要

摘要: 【目的】为研究不同改性剂配比、冰醋酸浓度、处理时间和温度对竹材的顺纹抗弯强度、顺纹抗拉强度以及硬度的影响，测定其抗弯强度、抗拉强度及硬度改性处理前后变化，以期获得合适的铅笔板处理工艺。【方法】以毛竹(Phyllostachys edulis)为原料，采用冰醋酸与双氧水浸渍处理工艺，针对改性竹材的化学成分变化，通过XRD、FTIR、TG仪器对改性竹材的化学成分及改性效果进行了表征。【结果】改性竹材抗弯强度和抗拉强度分别随处理温度、冰醋酸和双氧水含量的升高而降低，相比于对照组抗弯强度平均降低44.5%，抗拉强度平均降低59.9%，硬度平均降低44.81%；TG和DTG热解峰值温度滞后，残渣率下降，说明内部冰醋酸含量增加，纤维素、半纤维素有部分被分解；经XRD分析表明改性竹材的结晶度下降约1.5%，结晶度随着处理温度的升高有所降低；在1 250~1 377 cm^-1区域的甲基、羧基吸收峰和3 415 cm^-1处羟基吸收峰的增强，表明竹材内部亲水基团增加。【结论】优选改性剂浓度配比为1∶1，处理温度为60 ℃，处理时间为24 h。
- 竹材 /
- 冰醋酸 /
- 化学成分 /
- 力学性能
Abstract: 【Objective】In order to study the effects of different proportions of modifiers, glacial acetic acid concentration, treatment time and temperature on the bending strength, tensile strength and hardness of bamboo, to measure the changes of bending strength, tensile strength and hardness before and after modification, soa s to obtain the appropriate pencil plate treatment technology. 【Method】Bamboo was used as raw material and impregnated with glacial acetic acid and hydrogen peroxide. The chemical composition and modification effect of modified bamboo were characterized by XRD, FTIR and TG. 【Result】The bending strength and tensile strength of modified bamboo decreased with the increase of temperature, glacial acetic acid and hydrogen peroxide content, respectively. Compared with the control group, the bending strength and tensile strength of modified bamboo decreased by 44.5%, 59.9% and 44.81% respectively. The peak pyrolysis temperature of TG and DTG lagged behind, and the residue rate decreased, indicating that the content of glacial acetic acid increased, and some cellulose and hemicellulose were decomposed. XRD analysis showed that the crystallinity of modified bamboo decreased by about 1.5%, and the crystallinity decreases with the increase of treatment temperature. The enhancement of methyl and carboxyl absorption peaked at 1 250-1 377 cm^-1 and hydroxyl absorption peaked at 3 415 cm^-1 indicated the increase of hydrophilic groups in bamboo. 【Conclusion】 The optimal modifier concentration ratio was 1∶1, treatment temperature was 60 ℃, and treatment time was 24 hours.
- Bamboo /
- Glacial acetic acid /
- Chemical composition /
- Mechanical properties

HTML全文

参考文献(19)

包永洁. 高温热处理前后竹材主要化学成分及物理力学性能研究[D]. 南京:南京林业大学,2009.

程瑞香,张齐生. 高温软化处理对竹材性能及旋切单板质量的影响[J]. 林业科学,2006,42(11):97-100.

惠珍珍,迟聪聪,柳咪,等. 乙酸预处理对木质纤维素结构及性能的影响[J]. 林业工程学报,2019,4(1):88-93.

姜海波,彭伊光. 竹材软化工艺及设备[J]. 林业机械与木工设备,2007(4):53-54.

王淋靓,张思原,梁琼元,等. 超声波辅助碱性双氧水法提取甘蔗渣纤维素最优工艺探讨[J]. 南方农业学报,2013,44(6):1008-1013.

王献轲,方长华,刘嵘,等. 竹材不同尺度单元纵向拉伸性能研究进展[J]. 竹子学报,2020,39(4):14 -24.

王燕. 竹材干燥特性及干燥变色机理研究[D]. 长沙:中南林业科技大学,2015.

魏新莉,刘君. 热处理对杨木铅笔板材性的影响[J]. 林业机械与木工设备,2010,38(7):18-20.

吴岩,李玉顺,葛贝德,等. 改性竹材的应用与前景[J]. 森林工程,2008(6):68-71.

余文军,应伟军,钟金环,等. 高温饱和蒸汽软化毛竹展平板的平衡含水率和尺寸稳定性[J]. 竹子学报,2021,40(1):27-31.

张袁松,蒋瑜春,胡福强,等. 乙酸脱除天然竹纤维木质素的研究[J]. 丝绸,2012,49(7):1-5.

周豆豆. 碱性条件下金属卟啉催化过氧化氢氧化纤维素反应的研究[D]. 长沙:湖南大学,2014.

Chen J P,Guagliano M,Shi M H,et al. A comprehensive overview of bamboo scrimber and its new development in China[J]. European Journal of Wood and Wood Products,2021,79(2):363-379.

Hu Y,Thalangamaarachchige V D,Acharya S,et al. Role of low-concentration acetic acid in promoting cellulose dissolution[J]. Cellulose,2018,25:4389-4405.

Li G,Fu S Y,Zhou A J,et al. Improved Cellulose Yield in the Production of Dissolving Pulp from Bamboo Using Acetic Acid in Prehydrolysis[J]. BioResources,2015,10(1):877-886.

Li Z Z,Luan Y,Hu J B,et al. Bamboo heat treatments and their effects on bamboo properties[J]. Construction and Building Materials,2022,331:127320.

Liu L J,Yuan Z Q,Fan X K, et al. A review of interfacial bonding mechanism of bamboo fiber reinforced polymer composites[J]. Cellulose,2022,29(1):101-105.

Nkeuwa W N,Zhang J L,Semple K E,et al. Bamboo-based composites:A review on fundamentals and processes of bamboo bonding[J]. Composites Part B:Engineering,2022:235:109776.

Noori A,Lu Y B,Saffari P,et al. The effect of mercerization on thermal and mechanical properties of bamboo fibers as a biocomposite material:A review[J]. Construction and Building Materials,2021,279(5):122519.

施引文献

资源附件(0)

访问统计