表板热处理温度对展平竹—杨木复合板物理力学性能的影响

韩佳; 黄纯; 杨宇涵; 梁琦淞; 王雪花

doi:10.12390/jbr2022109

表板热处理温度对展平竹—杨木复合板物理力学性能的影响

doi: 10.12390/jbr2022109

南京林业大学, 江苏南京 210037

基金项目:

江苏省高等学校大学生创新创业训练计划项目(202110298165H)

国家自然科学基金项目(31800471)

详细信息

作者简介:
韩佳，本科生，从事木竹复合材料研究。E-mail：2547748616@qq.com。

通讯作者:
王雪花,副教授,博士,从事木竹材性能改良及建筑家居应用研究。E-mail:wangxuehua@njfu.edu.cn

计量
- 文章访问数: 33
- HTML全文浏览量: 0
- PDF下载量: 12
- 被引次数: 0
出版历程
- 收稿日期: 2022-09-15

Effect of Heat Treatment Temperature of Surface Plate on Physical and Mechanical Properties of Flatten-Bamboo-Poplar Veneer Composite Board

Nanjing Forestry University, Nanjing 210037, Jiangsu, China

摘要

摘要: 【目的】充分发挥杨木与竹展平板各自的性能优势。【方法】以不同温度(120 ℃、140 ℃、160 ℃，0 MPa处理2 h)热处理的竹展平板为表板，杨木单板为芯板顺纹组坯制作展平竹—杨木复合板，通过测试其含水率、色差、光泽度、胶合强度、浸渍剥离率、抗弯强度、抗弯弹性模量等性能，分析表板热处理对复合板材物理力学性能的影响。【结果】物理性质方面，表板热处理使得复合板含水率大幅度降低；光泽度逐渐减小，色觉稳定性增大；总色差皆大于1.5，但材色变化不明显；胶合性质方面，表板热处理使得复合板胶合强度下降， 140 ℃处理时达最低值；浸渍剥离试验表明，表板热处理使得复合板胶合耐久性先增强后减弱；力学性质方面，随表板热处理温度的升高，弹性模量、抗弯强度均有一定提高，140 ℃ 处理时达最大值。【结论】表板热处理丰富了展平竹—杨木复合板的视觉效果，改善了复合板的抗弯强度、弹性模量，但对复合板的胶合性能具有一定的不利影响，实际使用中应根据具体需求进行选择。
- 展平竹—杨木复合板 /
- 表板热处理 /
- 处理温度 /
- 物理力学性能 /
- 胶合强度
Abstract: 【Objective】The purpose of this paper is to give full play to the performance advantages of poplar and bamboo exhibition plate. 【Method】In this study, bamboo exhibition plate with different temperature heat treatment (120 ℃, 140 ℃, 160 ℃, 0 MPa for 2 h) was used as surface plate and poplar veneer as core board to make flatten-bamboo-poplar veneer composite board which was made up by assemble patterns of parallel texture. The properties of flatten-bamboo-poplar veneer composite board such as equilibrium moisture content, color difference, gloss, bonding strength, dipping peeling rate, bending strength, modulus of elasticity and so on were tested, and the effects of different temperature treatment of the surface plate on the physical and mechanical properties of the composite board were analyzed. 【Result】The results showed that, in terms of physical properties, with the increase of heat treatment temperature of the surface plate, the equilibrium moisture content of the composite board decreased significantly. The gloss of the composite board decreased gradually, and the color perception stability increased. The total color difference was greater than 1.5, but the color change was not obvious. In terms of gluing properties, the heat treatment of the surface plate reduced the bonding strength of the composite board, reaching the lowest value at 140 ℃. Immersion peeling test showed that the bonding durability of the composite board was first strengthened and then weakened with the increase of temperature. In terms of mechanical properties, the modulus of elasticity and bending strength increased with the increase of heat treatment temperature of the surface plate, and reached the maximum value at 140 ℃. 【Conclusion】The heat treatment of surface plate enriches the visual effect of the flatten-bamboo-poplar veneer composite board, improves the bending strength and modulus of elasticity of the composite board, but has a certain adverse effect on the bonding performance of the composite board. In actual use, it should be selected according to specific needs.
- Flatten-bamboo-poplar veneer composite board /
- Heat treatment of surface plate /
- Treatment temperature /
- Physical and mechanical properties /
- Bonding strength

HTML全文

参考文献(29)

常馨曼,关明杰. 炭化处理对杨木单板及胶合板物理力学性能的影响[J]. 林业科技开发,2015,29(6):123-126.

丁涛,彭文文,李涛. 基于FT-IR和XPS的热处理白蜡木材色变化机理[J]. 林业工程学报,2017,2(5):25-30.

杜春贵,金春德,刘志坤,等. 中国竹材资源的深加工途径[J]. 延边大学农学学报,2004, 26(1):50-53.

范慧青. 木材炭化防腐处理对微生物生存条件的影响研究[D]. 呼和浩特:内蒙古农业大学,2014.

顾炼百,丁涛,王明俊,等. 高温热处理木材胶合性能的研究[J]. 林产工业,2010,37(2):15-18.

韩健,周文捷,邹越. 竹木复合板的拉伸与弯曲力学特性[J]. 中南林业科技大学学报,2014,34(10):107 -110.

何拓,罗建举. 20种红木类木材颜色和光泽度研究[J]. 林业工程学报,2016,1(2):44-48.

李坚. 板材科学[M]. 北京:高等教育出版社,2002.

李涛,顾炼百,江宁. 高温热处理对水曲柳材色的影响[J]. 林业科学,2009,45(12):149-153.

刘焕荣,张秀标,张方达,等. 我国竹展平技术研究现状与展望[J]. 世界林业研究,2020,33(4):99-104.

刘其梅,罗迎社,彭万喜,等. 炭化对杉木强度的影响[C]//中国化学会、中国力学学会第九届全国流变学学术会议论文摘要集. 长沙:中国化学会、中国力学学会流变学专业委员会,2008:188.

潘成锋,倪月中,涂登云,等. 一种大幅面拼花木地板:中国,ZL200920201886.0[P]. 2010-09-15.

邵卓平,周学辉,魏涛,等. 竹材在不同介质中加热处理后的强度变异[J]. 林产工业,2003,30(3):26-29.

申宗圻. 板材学[M]. 北京:中国林业出版社,1993.

史蔷,鲍甫成,吕建雄,等. 热处理温度对圆盘豆板材力学性能的影响[J]. 林业机械与木工设备,2011,39(1):27-29.

武秀明,孙正军,许敏敏,等. 竹木复合板与竹木复合层积材的抗弯性能[J]. 林业机械与木工设备,2014,42(6):18-21.

薛紫荞,王雪花,周亚琴,等. 负压轻炭化木材物理力学性能[J]. 浙江农林大学学报,2019,36(1):177-182.

张方达,张秀标,刘焕荣,等. 展平竹/人工林木材正交复合技术研究进展[J]. 林产工业,2020,57(9):6-9

,15.

张齐生. 竹材胶合板的研究——Ⅱ.竹材胶合板的热压工艺[J]. 南京林业大学学报(自然科学版),1989,13(1):32-38.

郑志锋. 木材的颜色是如何产生的[J]. 云南林业,2005,26(2):32.

中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. GB/T 17657-2013 人造板及饰面人造板理化性能试验方法[S]. 北京:中国标准出版社,2014.

中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会. GB/T 9846-2015 普通胶合板[S]. 北京:中国标准出版社,2015.

周建斌,邓丛静,蒋身学,等. 炭化木物理力学性能的研究[J]. 林产工业,2008,35(6):28-31

,41.

周亚琴,薛紫荞,黄琼涛,等. 真空热处理对家具用奥克榄木材物理力学性能的影响[J]. 林业工程学报,2020,5(4):73-78.

Cihad B B. A comparative study of some of the mechanical properties of pine wood heat treated in vacuum, nitrogen, and air atmospheres[J]. BioResources,2018,13(3):5504-5511.

Emrah A,Ergun B,Hilmi T,et al. Decay resistance, physical, mechanical, and thermal properties of heated oriental beech wood[J]. Wood Research,2015,60(6):913-928.

Johansson D, Morén T. The potential of colour measurement for strength prediction of thermally treated wood[J]. Holz als Roh-und Werkstoff,2006,64(2):104-110.

Wang X H,Fei B H,Liu J L. Effect of vacuum heat treatment temperature on physical and mechanical properties of eucalyptus pellita wood[J]. Wood and Fiber Science,2014,46(3):368-375.

Wei Y X,Wang M J,Zhang P,et al. The role of phenolic extractives in color changes of locust wood (Robinia pseudoacacia) during heat treatment[J]. BioResources,2017,12(4):7041-7055.

施引文献

资源附件(0)

访问统计