Mechanical Properties and Selection of Tension Bamboo Strips Used in Structure Design Contest
-
摘要: 受拉竹条是全国大学生结构设计竞赛中的常用杆件,但目前对受拉竹条科学选用方法的研究较为欠缺。因此,针对太原理工大学结构设计竞赛中常用的1 mm×6 mm、2 mm×2 mm和3 mm×3 mm这3种不同截面竹条开展受拉力学性能实验研究,探究含水率、质量、维管束数量和刨磨处理等因素对抗拉极限承载力的影响。研究结果表明:竹材强度随含水率增加先增大后减小,最佳含水率为14%;对未处理的杆件,抗拉极限承载力与杆件质量存在线性关系;杆件质量相近时,可通过维管束数量和竹条颜色选择受拉竹条;通过刨磨处理杆件稀疏维管束,可减轻质量,提高荷质比;研究结果可为结构设计竞赛中受拉竹条科学选用提供参考依据。Abstract: Tension bamboo strips are common structural elements in the National Structure Design Contest for College Students. At present,however,the research is scarce on the scientific selection of tension bamboo strips. Therefore,mechanical experiments were performed to study the tensile properties of bamboo strips with cross-sections of 1 mm×6 mm,2 mm×2 mm and 3 mm×3 mm commonly used in structure design contest. And the impacts of moisture content,weight,number of vascular bundles and planing treatment on the ultimate tension capacity were examined. The results indicated that the tensile strength of bamboo strips increased first and then decreased as the moisture content rose,and the optimal moisture content was 14%. For untreated bamboo strips,there was a linear relationship between the ultimate tension capacity and the weight;When the weights were similar,the tension bamboo strips could be selected by the number of vascular bundles and the color of bamboo. If part of bamboo strip with sparse vascular bundles was removed by planning and grinding,the weight was reduced and the load-to-mass ratio was improved. These results may serve as references for selecting tension bamboo strips in structure design contest.
-
Key words:
- Structure design /
- Mechanics /
- Tension bamboo strip /
- Experiment /
- Selection method
-
[1] 宋晓冰,陈思佳. 以第一性思维引导实践创新——以结构设计竞赛为例[J]. 高等工程教育研究,2019(6):83-86. [2] 何春保,倪春林,李庚英,等. 提高大学生学科竞赛实践教学质量的途径[J]. 实验技术与管理,2020,37(10):23-26. [3] 王永宝,张留鹏,王健,等. 大学生结构设计竞赛受压空心杆力学性能试验研究[J]. 高等建筑教育,2021,30(4):148-157. [4] 聂诗东,张辉,李静尧,等. 竹皮轴压箱形构件整体稳定性能试验研究[J]. 高等建筑教育,2022,31(1):163-170. [5] 宋晓冰,吴晓昂,闫斌,等. 大学生结构设计竞赛方案设计原则及案例分析[J]. 力学与实践,2020,42(3):388-393. [6] 王永宝,贾靖垚,张翛,等. 加肋箱型长杆极限承载力实验研究[J]. 力学与实践,2021,43(5):722-727. [7] 常海林,张旭钦,钱格军,等. 大学生结构设计大赛材料力学性能试验研究[J]. 高等建筑教育,2017,26(5):108-114. [8] 贾新聪. 结构竞赛模型材料物理力学性能及模型设计制作研究[D]. 郑州:华北水利水电大学,2018. [9] 周爱萍,黄东升,车慎思,等. 竹材维管束分布及其抗拉力学性能[J]. 建筑材料学报,2012,15(5):730-734. [10] 李霞镇. 毛竹材力学及破坏特性研究[D]. 北京:中国林业科学研究院,2009. [11] 刘波,陈志勇,殷亚方,等. 两项竹材物理力学性质试验方法标准的比较[J]. 木材工业,2008,22(4):26-29. [12] 国家技术监督局. GB/T 15780—1995 竹材物理力学性质试验方法[S]. 北京:中国标准出版社,1995. [13] 王永宝,秦鹏举,王健,等. 大学生结构设计竞赛基本杆件力学性能试验研究[J]. 广东交通职业技术学院学报,2021,20(1):76-80. [14] 祝明桥,张紫薇,王华,等.竹材力学性能及混凝土环境中影响[J].湖南科技大学学报(自然科学版),2020,35(3):50-56. [15] 陈琦,陈美玲,费本华. 水分影响竹材力学性能研究现状[J]. 竹子学报,2018,37(2):84-89. [16] 袁晶,张雪霞,余雁,等. 维管束分布及结构对竹材宏观压缩性能的影响[J]. 中南林业科技大学学报,2019,39(6):121-127.
点击查看大图
计量
- 文章访问数: 375
- HTML全文浏览量: 58
- PDF下载量: 143
- 被引次数: 0